Vipower Portable External Enclosure VP-9258(T) Bedienungsanleitung PDF herunterladen (Seite 11)

VP-9258(T) USER MANUAL

12. Finally, secure the upper case with the two retaining screws.

4-3 Connect the USB 2.0 External Enclosure VP-9258(T) to

Your Computer

Step1:

Boot-up your computer. Make sure the USB/USB 2.0 host adapter

and driver are installed in your computer.

Step2:

Connect one USB connector end of the USB cable into the USB

Port of your USB 2.0 External Enclosure VP-9258(T).

Step3:

Connect the Power Adapter Power Cord to the +5V/+12V Power

Adapter. Then, plug one end of power cord into an AC power

outlet, and the other end to the power inlet of your USB 2.0 Ex-

ternal Enclosure VP-9258(T).

Step4:

Power ON your USB 2.0 External Enclosure VP-9258(T).

Step5:

Proceed to the next “Driver Installation” section and follow the

instructions for your operating system after plugging the USB

connector end of the USB cable into a USB port on your computer.

Note:

This device will auto-detect the speed of your USB port and

adjust between USB 1.0 and USB 2.0 speed once the driver

is installed.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Keine Kommentare

Vipower Portable External Enclosure VP-9258(T) Bedienungsanleitung Seite 11